
Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 54"
Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.
- On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.
- For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.
- Using the wrench that is included, loosen the screws on the back of the buckle.
- Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.
- Tighten the screws until they are flush with the buckle. You will get resistance.
- Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.
- Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.
Includes: 1 Tactical Nylon Gun Belt 1.5", one belt tip keeper, hex wrench & set screws
Kore Reinforced Every Day Carry belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time. Tactical belts are 2X’s as stiff as our leather EDC belts.
Belt Width/Thickness |
1.5” / 5 mm |
Load Rating |
Up to 10 lbs / IWB, OWB or Appendix |
Size Range |
Regular Fits 24”-54”, EXL fits 54” - 72” (black only) |
Buckle Material / Finish |
Alloy/ Powder Coat |
Buckle Size / Weight |
3.5” x 1.75” / 3-4 oz. |
Adjustable Track |
Provides over 40 - ¼” size positions |
Belt Reinforcement |
Power-Core™ Center for added stiffness & support. Virtually indestructible |
Belt Material |
Nylon Outer / Super Fiber Inner |
Belt Tip Keeper |
Included |
Interchangeable |
All X Series Gun Buckles + Western Collection Buckles |